• Choose your location:

  • Center the template in your location and use masking tape to hang on wall:

  • Use the drywall screw to mark the locations on the wall:

All fasteners, hardware, and hanging instructions included are suggested in good faith by the artist, however, every hanging situation differs, and therefore the ultimate decision is the customer’s choice.

  • Remove template and put the nails flush into all the marks except for the big island location (far right).  Screw the drywall screw that was used to mark the locations on the wall, into the mark where the big island goes.  Be sure not to screw the drywall screw all the way in, but keep it off the wall far enough to go into the hole of the big island’s magnet:

  • Using the map on the template, arrange and orient the islands on the wall sticking the magnets on the nails:

Maintenance and Hanging Location:

All island chains do not require any wax, oil, additional finish, or care.  However, wood sets should be hung where they do not receive excessive sunlight, humidity, or temperature swings; such as those found in bathrooms, outdoors, etc.  Metal clad sets are more tolerant of such factors, however, it is advisable they are not hung outside, or subjected to excessive humidity.

(A 45” set is featured but these instructions also apply for 24” and 36” set sizes)